This file contains the following components.
- boost files (to adjust speed)
- software (to customize the controller)
To install the software, you need the following.
Other information:
The booster/controller cable can be purchased. via this link.
Manual
- Data: black/green/yellow
- Current: black/orange
Step 1: Connect the large white plug to the controller, which is located under the storage compartment.
Step 2: Plug the USB data cable into the computer.
Step 3: On the computer, go to the folder and open windowsdesktop-runtime-5.0.12-win-x64.exe. If the program has been successfully installed, you can close it. It is possible that the program is already on your computer; in that case, you can also close it.
Step 4: Go to the IVA NCE Software folder on the computer and open ProgrammerCore.exe.
After the program has opened, you see the following.
Step 5: Check the following (Ignore Cus.) and press OK.
Step 6: Select the correct port and click on FILE, then on LOAD FROM LOCAL ZIP FILE. Do you want to know which port you need? Then remove the data cable. When you put the data cable back in, you will see it appear in the dropdown.
Step 7: Open the correct folder on the computer and select the correct boost file with the desired speed. Make sure to upload the zip file. Attention! Select the correct performance files for the P mode.
Step 8: Plug the USB power cable into the computer's USB port with the power icon (see photo below).
Step 9: The following appears: the controller is now being updated.
Step 9: When you see the following, the controller has been updated; close the program before disconnecting your USB cables.
The controller has now been updated with the new software.